ABSTRACT
Dental implants have been utilized for many years to treat individuals with missing teeth. To optimize the long-term success rate of such implants, new designs, surfaces, and materials have been analyzed. It is important for the clinician to have a background in the field of implant surface design, to be familiar with the strengths and limitations of the available options, and to be aware of the alterations in surface structure that may occur following installation. This article provides a detailed review of the structure and the surface characteristics of dental implants, the modifications of implant surface, as well as the methods of evaluating implant surface structure. Moreover, it provides information concerning the structural changes that may take place at the time of dental implant placement. It is important for clinicians to be aware of such changes to plan and execute implant procedures with the highest possible success and implant survival rates.
ABSTRACT
Background@#Accessory infraorbital foramen (AIOF) can change the normal course of emerging branches of the infraorbital nerve and blood vessels exiting the infraorbital foramen (IOF). This study aimed to examine the AIOF, number of foramina, and their position in relation to IOF using cone-beam computed tomography (CBCT). @*Methods@#We performed a retrospective CBCT assessment of hospital records between January 2018 and August 2022. The CBCT of 507 patients were examined to extract information on the prevalence, number, position, linear distance from the IOF, and diameter of AIOF in relation to demographic factors. Descriptive statistics were used to evaluate the prevalence of AIOF. Mean and standard deviation were used to calculate the linear distance and diameter of the AIOF, respectively. The AIOFs, its distribution, and number were compared between sexes and sides using the chi-square test. The independent t-test and Mann–Mann-Whitney test were used to compare the mean difference between the sexes and sides. Statistical significance was set at P < 0.05. @*Results@#In this current study, the prevalence of AIOF was 7.1% (36 of the 507 patients). Additionally, the current study examined the number of foramina using a single foramen on each side and double foramina located bilaterally at a distance from the AIOF to the IOF. The mean AIOF diameter was also studied, and the AIOF position with respect to the IOF on CBCT was superomedial or inferomedial. There were no statistically significant associations between any of the parameters assessed in this study when comparing sex and sides. @*Conclusions@#A greater number of patients with AIOF presented with a single foramen and unilateral occurrence, without a statistically significant difference. The AIOF was most commonly located superomedial to the IOF.
ABSTRACT
The high success rate of dental treatment is dependent on the cooperation of pediatric patients during procedures. Dental treatment often causes pain, particularly in children. The factors in providing treatment to pediatric patients include the characteristics and location of the tooth, profoundness of the anesthesia including the type of local anesthetic, and cooperation of the patient. Previous studies have examined several techniques to successfully achieve profound pulpal anesthesia in maxillary permanent teeth. The dentist should select the injection technique to be used based on patient needs. In children, either buccal with palatal injections or buccal with intra-septal injections may be used to anesthetize the permanent maxillary first molar. Buccal with palatal injections are commonly used prior to routine maxillary dental procedures. Currently, there are only a few studies on the employment of buccal with intra-septal injections to anesthetize permanent maxillary first molars in pediatric patients. This review will focus on efficacy of buccal with palatal versus buccal with intra-septal pulpal anesthesia of the permanent maxillary first molars in pediatric patients and aim to determine which technique should be used during routine dental procedures.
ABSTRACT
Background@#Impacted mandibular third molar removal is one of the most commonly performed oral surgical procedures. This procedure can lead to several postoperative complications, such as trismus, facial swelling, and pain, which occur as a result of the inflammatory responses to surgery. This study compared the efficiency of preoperative injections of 4 mg versus 8 mg dexamethasone into the pterygomandibular space to reduce postoperative sequelae. @*Methods@#This was a randomized, prospective, split-mouth, controlled study, including 52 mandibular third molar surgeries in 26 patients. Each patient was randomized to either the 4 mg or 8 mg dexamethasone injection group. Dexamethasone was injected into the pterygomandibular space after numbness from local anesthesia.Data were collected for trismus, facial swelling, visual analog scale (VAS) pain score, and the number of analgesics taken during the evaluation period. The level of significance was set at P 0.05). @*Conclusion@#Compared to the 4 mg preoperative dexamethasone injection, the 8 mg preoperative dexamethasone injection into the pterygomandibular space was more effective in reducing postoperative swelling and pain following the surgical removal of the impacted mandibular third molar. However, the difference in trismus could not be evaluated clinically. Therefore, the recommendation of administering the 4 mg dexamethasone preoperative injection is optimal in the third molar surgical procedure.
ABSTRACT
Oncological resection followed by reconstruction with a free fibular graft is still considered to be the gold standard treatment for functional and prosthetic rehabilitation of oral cancer patients. But this tedious traditional process is challenging for surgeons, as they have to deal with associated curve anatomy, surrounding innervations, and maintenance of functional and aesthetical acceptability. Such manual and operator’s skill dependent surgery can commonly demand a longer treatment duration; leading to an increased risk for prolonging the period of ischemia with increased morbidity, which frequently ends with an uncertain, unsatisfactory outcome. Technological advancements in the 20th and 21st centuries present a revolutionary improvement in the field of reconstructive surgery. Virtual surgical planning (VSP) and threedimensional (3D) bio-printing incorporating computer-aided design and computer-aided modeling is a promising tech in modern head and neck reconstruction. This recent innovation is more polished regarding initiation of patient-customized models, pre-bent plates, and osteotomy guides which further increase surgical precision, improve operative efficiency, ensure proper wound healing, shorten operative time, reduce operative cost, and decrease morbidities. This review focuses on the virtual surgical planning and 3D bio-printing technologies to evaluate their efficiency of qualitative and quantitative outcomes of resection and reconstruction of mandible in head-neck cancer using fibular graft.
ABSTRACT
Dexamethasone has been used in oral and maxillofacial surgery for postoperative pain, swelling, and trismus following third molar surgeries. It is a potent and powerful drug that can alleviate the aforementioned postoperative sequelae. Dexamethasone is responsible for inhibiting the release of inflammatory mediators in the inflammation process to improve patient quality of life after surgical intervention. There are several available routes of administering dexamethasone. This article will help determine the suggested routes of administration, dosage, parameters, and dexamethasone timing for third molar surgeries.
ABSTRACT
Impacted teeth are a frequent phenomenon encountered by every clinician. The artificial eruption of embedded teeth is the process of directing an impacted tooth into normal occlusion. This procedure is currently attracting attention, with the aim of finding the best technique to use according to each case. This article presents key information regarding impacted incisors, canines, and premolars. In addition, we describe the most common techniques to use for artificial eruption, the open and closed techniques. We review the literature concerning these techniques and outline how clinicians can manage every type of impacted tooth.
ABSTRACT
Objectives@#The goal of this retrospective study was to determine the significance and impact of several factors on the alveolar cleft bone grafting procedure. @*Materials and Methods@#The medical records were reviewed. In addition, x-rays were checked. The size of every cleft was measured in this retrospective study. The analyzed factors included sex, age, type of cleft, size of the cleft, and the type of flap used in surgery. The patients were characterized into group A (no complications, Bergland scale 1 or 2), group B (complications or Bergland scale 3), or group C (failure cases). Statistical analysis was performed with a P-value set at 0.05. @*Results@#There were 32 cases in group A, 26 in group B, and 9 in group C. Multinomial logistic regression showed an association between the type of the cleft and the size of the cleft, with the presence of complications, or achieving type 3 on the Bergland scale, with odds ratios of 5.118 and 6.000, respectively. The type of cleft was related to failure with an odds ratio of 4.833. Given a small sample, statistical analysis could not be performed to evaluate the relationship between the size of the cleft and group C. Age, sex, and the type of the flap were not significant factors. @*Conclusion@#The cleft size of more than 10 mm and bilateral clefts were listed regarding their effect on the procedure. Clinicians should not overlook these factors. In addition, patients must be informed of any risks that are present.
ABSTRACT
Impacted teeth are a frequent phenomenon encountered by every clinician. The artificial eruption of embedded teeth is the process of directing an impacted tooth into normal occlusion. This procedure is currently attracting attention, with the aim of finding the best technique to use according to each case. This article presents key information regarding impacted incisors, canines, and premolars. In addition, we describe the most common techniques to use for artificial eruption, the open and closed techniques. We review the literature concerning these techniques and outline how clinicians can manage every type of impacted tooth.
Subject(s)
Bicuspid , Incisor , Surgery, Oral , Tooth , Tooth, ImpactedABSTRACT
Background@#Corticosteroids have been widely used by oral surgeons for reducing swelling caused by wisdom teeth surgery. However, they have not been proven to decrease pain. This study was aimed at analyzing previous studies pertaining to corticosteroids and pain reduction following wisdom teeth surgery. @*Methods@#The Science Direct, PubMed, and MEDLINE databases were searched for relevant journals according to a systematic search strategy (Patient Intervention Comparison Outcome Study). Randomized controlled trials published in English from 1998 to 2017 were extracted. @*Results@#Twenty-seven articles were included, with a total of 36 comparative cases. Methylprednisolone and dexamethasone were the most commonly used corticosteroids. Intramuscular injections of corticosteroids were optimal for pain reduction, regardless of the time of administration. @*Conclusions@#Corticosteroids can be used as an adjuvant for pain reduction following wisdom teeth surgery.Methylprednisolone and dexamethasone delivered via the intramuscular route is the best method for effective pain reduction. The ideal time for administration of corticosteroids is the preoperative period.
ABSTRACT
Background@#Previous studies have investigated the effects of dexamethasone injections into the pterygomandibular space and compared them to those of controls; however, the effects of dexamethasone injections before and after lower third molar surgery on postoperative complications have not been studied. This research investigated the postoperative sequelae of dexamethasone injections before and after surgery into the pterygomandibular space. The aim of this study was to evaluate the effects of preoperative and postoperative injections of 4 mg of dexamethasone into the pterygomandibular space on postoperative pain, facial swelling, and the restriction of mouth opening following lower third molar surgical removal. @*Methods@#Twenty-seven participants with bilateral symmetrical lower impacted third molars were included in this study. Each participant was randomly allocated to one of two groups. Group A received injections of 1 ml dexamethasone (4 mg/mL) and 1 mL placebo into the pterygomandibular space before and after surgery, respectively. Group B received the same doses of placebo before surgery and dexamethasone after surgery. @*Results@#A significant restriction of mouth opening on the second postoperative day was observed in both groups. Nonetheless, the postoperative restriction of mouth opening, facial swelling, postoperative pain, and analgesic consumption after lower third molar surgical removal were not significantly different in the two groups. @*Conclusions@#Regardless of the time of administration, dexamethasone injections into the pterygomandibular space resulted in satisfactory control of the postoperative sequelae of the mandibular third molar surgical removal.
ABSTRACT
Background@#Mandibular third molar removal is the most common surgical procedure encountered in oral and maxillofacial clinics. It also presents the greatest challenges and controversies for surgeons when surgical removal is considered. Furthermore, diverse anesthesia results and success rates are achieved after using the same concentrations of different solutions or the same amounts of local anesthetics. The purpose of this study was to examine the efficiency of using double-cartridge (3.4 ml) 4% lidocaine (high concentration) and 4% articaine with a 1:100000 epinephrine infiltration in the retromolar region for impacted lower third molar surgery. @*Methods@#This double-blind study included 30 patients with symmetrically impacted lower third molars. The patients were randomly selected to receive 4% articaine on one side and 4% lidocaine on the other, as a local anesthetic for third molar surgery. The onset, duration of soft-tissue numbness, pulpal sensitivity, amount of additional local anesthetic needed, pain score during the surgical procedure, and duration of the operation were recorded. @*Results@#The results of this research indicate that 86.7% of the operations in the 4% articaine group and 83.3% of those in the 4% lidocaine group were successful. Furthermore, the outcomes in both groups were not statistically significant (P > 0.05). Numbness onset occurred faster in the articaine group than it did in the lidocaine group. However, the duration of soft-tissue anesthesia and pain scores recorded immediately postoperatively were similar. @*Conclusion@#It is concluded that 4% lidocaine and 4% articaine had a similar infiltration efficacy in the retromolar region and both local anesthetics are adequate for impacted lower third molar surgery. There were no statistically significant differences between the two local anesthetics regarding pain control and the duration of soft-tissue numbness during the procedure.
ABSTRACT
Background@#This research evaluated the numbness produced by lignocaine at an equal or higher concentration than that of 4% articaine through a single point of injection for maxillary third molar surgery. This randomized double-blind study was conducted to compare the anesthetic efficiency of 4% lignocaine with that of 4% articaine in impacted maxillary third molar surgery using a single buccal infiltration alone. @*Methods@#The study participants were 30 healthy patients requiring the bilateral surgical removal of symmetrically-positioned maxillary third molars. Using a split-mouth design, each patient randomly received buccal infiltration of 1.7 ml of 4% lignocaine and 1.7 ml of 4% articaine during two separate appointments. After 15 minutes of anesthetic injection, surgery was performed by the same surgeon using a consistent technique on both sides. Pinprick test pain scores of the buccal and palatal gingiva of the maxillary third molar after 10 minutes and 15 minutes latencies, pain scores during the surgery, the need for supplemental anesthesia, and patients’ satisfaction with anesthetic efficiency were recorded. Surgery performed without supplemental anesthesia was categorized as successful. @*Results@#The success rates of 4% lignocaine and 4% articaine (83.34% vs. 86.67%, P = 1.00) were not significantly different. Only 5 cases (4 cases in the articaine group and 1 case in the lignocaine group) reported mild pain and pressure sensation (NRS ≤ 1) on probing at the palatal side after 15 minutes of latency (P = 0.25). The pain scores of maxillary third molar surgery in the two groups were not significantly different (P > 0.05).Moreover, the statistical analysis confirmed the comparable patient satisfaction of two study groups (P = 0.284). @*Conclusion@#This study provides evidence that single buccal infiltrations of 4% lignocaine and 4% articaine have comparable anesthetic efficacy and success rates for impacted maxillary third molar surgery. Both 4% lignocaine and 4% articaine can produce effective palatal anesthesia and pain control using buccal infiltration alone after 15 minutes of latency.
ABSTRACT
Objectives@#Palatal infiltration is the most painful and uncomfortable anesthesia technique for maxillary impacted third molar surgery (MITMS). This approach could cause patients distress and aversion to dental treatment. The aim of this study was to evaluate the anesthetic efficacy of a buccal infiltration injection without a palatal injection in MITMS. @*Materials and Methods@#This prospective research study was a crossover split mouth-randomized controlled trial. Twenty-eight healthy symmetrical bilateral MITMS patients (mean age, 23 years) were randomly assigned to two groups. Buccal infiltration injections without palatal injections were designated as the study group and the buccal with palatal infiltration cases were the control group, using 4% articaine and 1:100,000 epinephrine. The operation started after 10 minutes of infiltration. Pain assessment was done using a visual analogue scale and a numeric rating scale after each injection and extraction procedure. Similarly, the success rate, hemodynamic parameters, and additional requested local anesthetic were assessed. @*Results@#The results showed that the pain associated with local anesthetic injections between both groups were significantly different. However, the success rates between the groups were not significantly different. Postoperative pain was not significant between both groups and a few patients requested an additional local anesthetic, but the results were not statistically significant. For hemodynamic parameters, there was a significant difference in systolic pressure during incision, bone removal, and tooth elevation. In comparison, during the incision stage there was a significant difference in diastolic pressure; however, other steps in the intervention were not significantly different between groups. @*Conclusion@#We concluded that buccal infiltration injection without palatal injection can be an alternative technique instead of the conventional injection for MITMS.
ABSTRACT
Impacted teeth are a frequent phenomenon encountered by every clinician. The artificial eruption of embedded teeth is the process of directing an impacted tooth into normal occlusion. This procedure is currently attracting attention, with the aim of finding the best technique to use according to each case. This article presents key information regarding impacted incisors, canines, and premolars. In addition, we describe the most common techniques to use for artificial eruption, the open and closed techniques. We review the literature concerning these techniques and outline how clinicians can manage every type of impacted tooth.
ABSTRACT
Objectives@#The goal of this retrospective study was to determine the significance and impact of several factors on the alveolar cleft bone grafting procedure. @*Materials and Methods@#The medical records were reviewed. In addition, x-rays were checked. The size of every cleft was measured in this retrospective study. The analyzed factors included sex, age, type of cleft, size of the cleft, and the type of flap used in surgery. The patients were characterized into group A (no complications, Bergland scale 1 or 2), group B (complications or Bergland scale 3), or group C (failure cases). Statistical analysis was performed with a P-value set at 0.05. @*Results@#There were 32 cases in group A, 26 in group B, and 9 in group C. Multinomial logistic regression showed an association between the type of the cleft and the size of the cleft, with the presence of complications, or achieving type 3 on the Bergland scale, with odds ratios of 5.118 and 6.000, respectively. The type of cleft was related to failure with an odds ratio of 4.833. Given a small sample, statistical analysis could not be performed to evaluate the relationship between the size of the cleft and group C. Age, sex, and the type of the flap were not significant factors. @*Conclusion@#The cleft size of more than 10 mm and bilateral clefts were listed regarding their effect on the procedure. Clinicians should not overlook these factors. In addition, patients must be informed of any risks that are present.
ABSTRACT
Hyaluronic acid (HA) has long been studied in diverse applications. It is a naturally occurring linear polysaccharide in a family of unbranched glycosaminoglycans, which consists of repeating di-saccharide units of N-acetyl-D-glucosamine and D-glucuronic acid. It is almost ubiquitous in humans and other vertebrates, where it participates in many key processes, including cell signaling, tissue regeneration, wound healing, morphogenesis, matrix organization, and pathobiology. HA is biocompatible, biodegradable, muco-adhesive, hygroscopic, and viscoelastic. These unique physico-chemical properties have been exploited for several medicinal purposes, including recent uses in the adjuvant treatment for chronic inflammatory disease and to reduce pain and accelerate healing after third molar intervention. This review focuses on the post-operative effect of HA after third molar intervention along with its various physio-chemical, biochemical, and pharmaco-therapeutic uses.
Subject(s)
Humans , Acetylglucosamine , Biocompatible Materials , Glycosaminoglycans , Hyaluronic Acid , Molar, Third , Morphogenesis , Regeneration , Vertebrates , Wound HealingABSTRACT
BACKGROUND: There are many techniques of inferior alveolar nerve block injection (IANBI); one among them is the computer-assisted intraosseous injection (CAIOI). Here we aim to evaluate the effectiveness of CAIOI with Quicksleeper® in mandibular third molar surgery. METHODS: This study is a clinical, single-blind, randomized, split-mouth, controlled trial including 25 patients (10 males and 15 females, mean age 21 years). The patients underwent surgical removal of bilateral mandibular third molars with two different IANBI techniques. One side was injected using Quicksleeper®, and the other side was injected using a conventional IANBI. Both techniques used one cartridge (1.7 ml) of 1:100,000 epinephrine 4% articaine. A supplementary injection was used if necessary. All volumes of anesthetic agent used were recorded. Statistical analysis was performed using paired t-test and Wilcoxon test. RESULTS: This research showed that CAIOI has faster onset and shorter duration of action than IANBI (P < 0.05). The pain was similar in both techniques. In the CAIOI group, one-third of the cases could be completed without additional anesthesia. The remaining two-thirds required minimal supplementary volume of anesthesia. The success rates were 68% for CAIOI and 72% for IANBI, respectively. CONCLUSION: CAIOI is an advantageous anesthetic technique. It can be used as an alternative to conventional IANBI for mandibular third molar surgery.
Subject(s)
Female , Humans , Male , Anesthesia , Carticaine , Epinephrine , Mandible , Mandibular Nerve , Molar, ThirdABSTRACT
Topical anesthetics are commonly used in oral & maxillofacial surgery to control pain in the oral cavity mucosa before local anesthetic injection. These anesthetic agents come in many forms, developed for different usages, to minimize adverse reactions, and for optimal anesthetic efficiency. Earlier studies have revealed that these agents may also limit the growth of microorganisms in the area of anesthetic application. Many topical anesthetic agents show different levels of antimicrobial activity against various bacterial strains and Candida. The dosage of local anesthetic agent used in some clinical preparations is too low to show a significant effect on microbial activity. Efficiency of antimicrobial activity depends on the local anesthetic agent's properties of diffusion within the bloodstream and binding efficiency with cytoplasmic membrane, which is followed by disruption of the bacterial cell membrane. The antimicrobial properties of these agents may extend their usage in patients to both control pain and infection. To develop the topical local anesthetic optimal usage and antimicrobial effect, a collaborating antiseptic agent may be used to benefit the local anesthetic. However, more research is required regarding minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of topical local anesthetic agents with drug interaction between anesthetics and antiseptic agents.
Subject(s)
Humans , Anesthetics , Anesthetics, Local , Anti-Infective Agents , Candida , Cell Membrane , Dentistry , Diffusion , Drug Interactions , Microbial Sensitivity Tests , Mouth , Mucous Membrane , Surgery, OralABSTRACT
BACKGROUND: Anxiety control remains an important concern in dental practice. We evaluated the incidence, nature, and sequelae of complications during and after minor oral surgeries performed under intravenous midazolam and fentanyl sedation using the titration technique. METHODS: The medical records of patients who had undergone minor oral surgeries under moderate intravenous midazolam and fentanyl sedation at our institution between January 1, 2015 and December 31, 2015 were retrospectively evaluated. Age, sex, body mass index, medical history, American Society of Anesthesiologists (ASA) classification, indications for sedation, amount of sedative used, surgical duration, and recovery time were evaluated for all patients. RESULTS: In total, 107 patients aged 9–84 years were included. ASA class I and class II were observed for 56.1% and 43.9% patients, respectively. Complications associated with sedation occurred in 11 (10.2%) patients. There were no serious adverse events. Oxygen saturation reached 95% during the procedure in six patients; this was successfully managed by stimulating the patients to take a deep breath. Two patients exhibited deep sedation and one exhibited paradoxical excitement. After the procedure, one patient experienced nausea without vomiting and one exhibited a prolonged recovery time. The surgical procedures were completed in all patients. Obesity was found to be significantly associated with sedation-related complications. CONCLUSIONS: Our results suggest that complications associated with intravenous midazolam and fentanyl sedation using the titration technique for minor oral surgeries are mostly minor and can be successfully managed with no prolonged sequelae.